|
| |
|
Model S-6.5 Forced Ejection Scraper
| Heaped Capacity |
6.5 yd. |
| Width of Cut |
7' |
| Overall Width |
8' |
| 3 pc. Blade |
Replaceable |
| Tractor Hyd. Requirements |
2 Spool |
| Power Requirements---Wheel Tractor |
100 - 150 HP |
| Bolt-On Spindles |
8 Bolt Wheels |
| Tires |
12.5 x 16.1 14 Ply |
| Optional Equipment |
NA |
|
 |
| S-6.5 Model offers independent hydraulic control of cutting and
spreading and forced ejection. The push gate is operated with a single
cylinder, stabilized by guides to prevent mis-alignment. Load,
transport, spread and level with hydraulic controlled pushout---with a
good view of machine operations by the operator. |
|
Model S-8 Forced Ejection Scraper
| Heaped Capacity |
8 yd. |
| Width of Cut |
7 1/2' |
| Overall Width |
8 1/2' |
| 3 pc. Blade |
Replaceable |
| Tractor Hyd. Requirements |
2 Spool |
| Power Requirements---Wheel Tractor |
125 - 175 HP |
| Bolt-On Spindles |
8 Bolt Wheels |
| Tires |
16.5 x 16.1 |
| Optional Equipment |
NA |
|
 |
| S-8 Model offers independent hydraulic control of cutting and
spreading and forced ejection. The push gate is operated with a single
cylinder, stabilized by guides to prevent mis-alignment. Load,
transport, spread and level with hydraulic controlled pushout---with a
good view of machine operations by the operator. |
|
Model S-11 Forced Ejection Scraper
| Heaped Capacity |
11yd. |
| Width of Cut |
7 1/2' |
| Overall Width |
8 1/2' |
| 3 pc. Blade |
Replaceable |
| Tractor Hyd. Requirements |
2 Spool |
| Power Requirements---Wheel Tractor |
160 - 240 HP |
| Bolt-On Spindles |
8 Bolt Wheels |
| Tires |
16.5 x 16.1 14 Ply |
| Optional Equipment |
NA |
|
 |
| S-11 Model offers independent hydraulic control of cutting and
spreading and forced ejection. The push gate is operated with a single
cylinder, stabilized by guides to prevent mis-alignment. Load,
transport, spread and level with hydraulic controlled pushout---with a
good view of machine operations by the operator. Plus, it offers the
benefit of a larger payload for farm and industrial operations,
including extra HD spindles, hubs and wheels matched with a hefty
undercarriage and frame. |
|
Stabilized by guides to prevent mis-alignment. |
Hydraulic hose guides. |
Replaceable gooseneck to axle swivel
and pin assembly. |
| |
|
